Complete Tool Room
- (1) Three-axis programmable Knee Mill with Master Cam
- (2) Cincinnati Hydrotel Die Sinking Machines
- (1) Shaper
- (1) 36-inch x 144-inch Planer
- (1) Wilson Hardness Tester
- (3) Vertical Milling Machines with DRO
- (1) Horizontal Milling Machine
- (3) Cutter Grinders and (1) Drill Grinder
- (2) Engine Lathe and (2) Drill Presses
Steel Preparation
- (3) Horizontal Band Saws with auto feed, 12-inch capacity
- (1) Bader Abrasive Cut-off Saw
- (1) 210-ton Hydraulic Shear, capacity 3-inch rounds with semi-automatic handling equipment
- (1) Five-burner Cutting Torch
- (1) One-burner Cutting Torch
Forging
- (5) Forging Hammers with Hot-trim Presses and Slot Furnaces
- (1) 1000# Board Drop Hammer
- (2) 2000# Ceco Air Hammers
- (1) 2000# Board Drop Hammer
- (1) 2500# Board Drop Hammer
- (1) 1-1/2-inch Ajax Upset Forge with 100 KVA Solid State Induction Heater
- (1) Rotary Swaging Machine, 1-inch diameter capacity
Horizontal Machining
- (1) Daewoo Puma 200 CNC Turning Center
- (1) Daewoo Pima 200 CNC Turning Center with C-Axis and Bar Feeder
- (1) Hardinge T-51 Precision CNC Turning Center with Bar Feeder and Parts Catcher
- (1) Hardinge T-65 Cobra Long Bed Turning Center
- (1) Hardinge T-42 Cobra Turning Center
- (1) 13-inch swing x 40-inch Clausing Colchester Engine Lathe with Mimik 3.5 Tracer
- (2) Turret Lathers to 2-inch diameter capacity
Vertical Machining
- (2) Tree Vertical Machining Centers, one with 50 Taper, with Chip & Spindle Chiller
- (4) 18-Spindle Deka Drilling & Tapping Machines
- (3) Single Kira Drill Presses with automatic reverse on feed for tapping
- (18) Clausing Drill Heads, 7/8-inch capacity, on various spindle combinations
- (1) Hurco VM2, 8,000 rpm with 16-station automatic swing-arm tool changer
Milling
- (14) Horizontal Production Milling Machines
- (2) Cincinnati Vertical Milling Machines
- (1) Heckert Knee-Type Horizontal Milling Machine with 17-inch x 70-inch table
|
Thread Rolling
- (2) MCS Kinefac Thread Rolling Machines, 1-1/2-inch diameter capacity
- (1) MCS Kinefac Thread Rolling Machine, 2-1/2-inch diameter capacity
Presses
- (1) 400-ton Ferracute Coining Press
- (1) 150-ton Verson Press Brake
- (4) 150-ton Hydraulic Presses with a large stock of Universal Bending Dies
- (9) Mechanical Crank Presses ranging from 20 to 250 tons, one with Coil-Feed Line
Broaching
- (1) 2.5-ton Broach with 24-inch stroke
- (1) 5-ton Vertical Broach with 48-inch stroke
- (1) 8-ton Horizontal Broach with 52-inch stroke
Welding & Robotic Welding
- (3) Panasonic PERFORMARC 100 Robotic Arc Welding Systems
- (3) Gas-shielded Pulse MIG Welders, 400 amp
- (10) Gas-shielded MIG Welders, 300 and 400 amp
- (1) 75 KVA Flash-Butt Welder
Heat Treating
- (1) Batch Quench Heat Treat Furnace with atmospheres to neutral-harden and carburize
- (2) Vertical Cyclone Draw Furnaces
Grinding
- (1) 24-inch x 36-inch Wheelabrator Tumblast Machine
- (3) Snag-wheel Grinders
- (2) 4-inch x 148-inch Abrasive Belt Finishers
- (1) 2-inch x 132-inch Abrasive Belt Finisher with Centerless Attachment
- (1) 18-inch x 36-inch Blanchard Rotary Surface Grinder
Painting
- (1) Power Wash hot-high pressure parts wash system
- (1) 14-foot x 24-foot Paint Booth with Electro Static Spray set-up with a 4-foot x 6-foot Bake Oven
Inspection
Inspection Department with all necessary Gages and Measuring Instruments including:
- (1) Helmel 18-inch x 30-inch x 30-inch Programmable (DCC) CMM with Metronics 300 software package
- (1) Brown and Sharpe "REFLEX" CMM with Analysis Software
- (1) Tinius Olsen 60,000# Super L Tensile Tester
|